Photonics Industries' DS Series OPO represents the FIRST commercially available Optical Parametric Oscillator to produce pulse rates at a high repetition rate of up to 50 kHz. The DS OPO produce peak power output of up to 300 kWatts with milli-Joule levels of energy per pulse, at kHz repetition rates. It can also produce 10 Watts of average power at a repetition rate of approximately 10 kHz. These lasers are produced with either a fixed wavelength, or continuously tunable wavelength in the region of 1.5 ¦Ìm to 3.4 ¦Ìm.
Features - Diode Pumped Technology
- Patented OPO Generation Technology
- TEM00 Beam
- Pulse Rates from Single Shot to 50kHz
- mJ Pulse Energy at kHz Repetition Rates
- RS232 Computer Control
|  |
To find the laser model which will most closely meets your specifications.
DP-OPO Series
| |
DP10-OPO |
DP20-OPO |
| wavelength |
1.5 to 2 um |
2.2 to 3.4 um |
1.5 to 2 um |
2.2 to 3.4 um |
| Pulse Energy* @ 100Hz |
4mJ |
1mJ |
10mJ |
2mJ |
| Repetition Rate |
100Hz |
| |
DP10H-OPO |
DP20H-OPO |
| wavelength |
1.5 to 2 um |
2.2 to 3.4 um |
1.5 to 2 um |
2.2 to 3.4 um |
| Pulse Energy* @ 1kHz |
2mJ |
0.5mJ |
4mJ |
1mJ |
| Repetition Rate |
1kHz |
| Pulse Width |
6 to 10ns |
| Beam Mode |
TEM00 for 1.5-2um |
| Beam Diameter @ exit(nominal) |
0.7 to 1mm |
| Pulse to Pulse Stability |
+/- 3% rms |
* Pulse energy specified at peak wavelength. For higher pulse energy please contact the factory.
DS-OPO Series
| |
DS10-OPO |
DS20-OPO |
| wavelength |
1.5 to 2 um |
2.2 to 3.4 um |
1.5 to 2 um |
2.2 to 3.4 um |
| Average Power* |
1W |
0.3W |
4W |
1W |
| Pulse Width @ 1kHz |
10-15ns |
| Beam Mode |
TEM00 |
| Beam Diameter |
0.7 to 1mm |
| Pulse to Pulse Stability |
+/- 3% rms |
| Repetition Rate |
range depending on gain medium
(1-5kHz, 4-10kHz, 10-20kHz) |
*@ 1kHz, Power specified at peak wavelength. For higher power please contact the factory.
DC-OPO Series
| |
DC150-OPO |
| wavelength |
1.5 to 2 um |
2.2 to 3.4 um |
| Average Power* |
0.3W |
0.075W |
| Pulse Width @ 1kHz |
10-15ns |
| Beam Mode |
TEM00 |
| Beam Diameter |
0.7 to 1mm |
| Pulse to Pulse Stability |
+/- 3% rms |
| Repetition Rate |
range depending on gain medium
(1-5kHz, 4-10kHz, 10-20kHz) |
*@ 1kHz, Power specified at peak wavelength. For higher power please contact the factory.
Photonics Industries makes lasers that are perfectly tuned for the application of your choice.
- Chemical Detection
- Eye-Safe Illumination
- NIR Spectroscopy
- MID-IR Spectroscopy
- LIDAR
- IR-MALDI
- Material Processing Research & Production
To view a dimensional drawing, please first choose the wavelength of interest followed by the specific model. Click to enlarge the dimensional drawing.
| |
Width |
Length |
Height |
Weight |
| Laser Head(DC) |
102 mm |
253 mm |
114 mm |
--- |
| Laser Head(DS/DP) |
191 mm |
559 mm |
95 mm |
--- |
| Laser Controller |
483 mm |
343 mm |
133 mm |
--- |
| Solid State Chiller |
483 mm |
438 mm |
177 mm |
20 kg |
| Electrical Requirement |
110 VAC 20 Amps/220 VAC 10 Amps @ 50/60 Hz |
| Ambient Temperature |
15¡æ to 30¡æ (59¨H to 86¨H) Operating Range |
| Umbilical Length |
3 meter (10 feet) |
