(Bohemia, NY - October 21, 2011) There is a desire to use shorter (i.e., sub ns) pulse width lasers to enable a more precise ablative based material processing. If the pulse width is too long >10 ns the processing is fast, but crude. If the pulse width is too short <10ps the processing is precise, but slow. In an effort to balance the optimum pulse width with material removal rate, Photonics Industriesdeveloped a unique sub ns (<1ns nominal pulse width) laser. Combining this with an excellent TEM00 mode quality (M² <1.5) Photonics Industries announces a unique high intensity(i.e., high brightness) sub ns laser (the SN series) for industrial micro machining apps.

These efficient lasers prove in for next generation applications such as:

• Tempered Glass, Sapphire, or Ceramics Cutting, Scribing and Drilling
• Crystalline Si or thin film based solar cell processing
• Low K wafers and LED substrates scribing and dicing
• Via hole drilling/flex circuit cutting;
• ITO patterning/FPD processing

and other novel micromachining applications.

Photonics Industries has several standard SN Series laser available:  

• Up to 40W @ 1064nm
• Up to 25W @ 532nm
• Up to 14W @ 355nm

all with <1ns nominal pulse widths, M² <1.5 at high repetition rate (up to 80kHz).

Photonics Industries also offers the Highest Power Commercially Available UV ns(30W of UV), as well as, high power green (50W at 532nm) and Deep UV (263 and 266nm) lasers.

Please join Photonics Industries at our booth at:

ICALEO Vendor Reception

at 4:00pm Tuesday, October 25, 2011

Hilton WALT DISNEY WORLD® Resort

Lake Buena Vista, FL 32830

 

For questions regarding this press release, please call Dr. Joyce Kilmer or Matt Corrello.   

 

SN Series Laser